BETON COLOR is a two component polyurethane non- yellowing coloured and weather-resistant coating specifically designed for the aesthetic protection of two components water-based membranes like BETONGUAINA and BETONGUAINA S.
BETONGUAINA.S is an integrated water-based waterproofing system composed of:
Component A: aqueous dispersion of polymers and additives.
Component B: reactive fillers.
After film formation, BETONGUAINA.S forms a film with both excellent waterproofing and elasticity characteristics at low temperatures, up to -30°C reinforced with NYCON 200, up to -20°C with NYCON 100.
BLACK PLAST W is a very dense waterproofing paste based on polymers, bitumens, admixtures and special fibres in aqueous emulsion.
After curing the product forms a very thick layer, which is extraordinarily water resistant also when submerged.
PROFILE H BS 10 is a co-extruded plastic profile that can be used for the realization of non-structural expansion and control joints by directly bonding it to the screed or the concrete with BETONSEAL MS 2.0 sealant.
EP LASTIK is a two-components water-based flexible mortar consisting of:
component A: concrete ready mix;
component B: aqueous dispersion of polymers and additives.
EP LASTIK may be applied on both horizontal and vertical surfaces and after curing forms a totally waterproof film with a good elasticity level.
The resulting layer is resistant to attack
EASY-LAST 90 is a gray, thick liquid product made up of one-component polyurethane polymers that by reacting with moisture, forms (even at low temperature) a UV resistant and weatherproof elastomeric membrane.
Alkali-resistant self-adhesive elastic band, with a butyl rubber base, coated with polypropylene non-woven fabric, specifically for the waterproofing and sealing of perimeter joints, fittings and areas subject to light movement.
Alkali-resistant elastic band, coated with polypropylene non-woven fabric, specifically for the interventions of waterproofing and sealing, perimeter joints, fittings and areas subject to light movement.
Weight Colours Consumption 310ml 1kg 5kg 20kg Black 1.2 and 1.8 kg/m² Licata Licalastic Svart Licalastic Svart is used as an impermeable liquid sheath where the use of bituminous membranes and the use of the flame, both horizontally and vertically, is not possible, to repair | seal and finish new
Weight Colours Consumption 1 kg Clear 0.030 – 0.080 kg/m² Licata LicaPrimer 300 Cristal LicaPrimer 300 Cristal finds its main destination of use as adhesion promoter for Licalastic 300 Cristal on: ceramic tiles of any kind (double firing, bisucit, porcelain soneware, clinker, etc.) | marble and natural stone | glazed