Schluter KERDI LINE V50 G2 Linear Drain


Length: 50cm
Price:
(
Request for best price
per pack )
(
Request for best price
per pack )

Description

Schlüter®-KERDI-LINE is a component linear drainage system for the construction of floor level showers with ceramic tiles, natural stone, or other coatings. It consists of a formed stainless steel channel body with a grate and frame structure that can be seamlessly adjusted to the thickness of the covering from 3 to 25 mm with the help of the installation aid included in the set.

Schlüter®-KERDI-LINE-H with horizontal drain features an integrated odour trap and a drain body.

Height of channel support: 
DN 40 (40 mm) = 78 mm 
DN 50 (50 mm) = 97 mm

Schlüter®-KERDI-LINE-H 50 G2 with front-facing horizontal drainage is equipped with an odour trap that is integrated into the drain body. In accordance with DIN 1253, it has a drain capacity of ≥ 0.8 l/s and a water trap height of 50 mm.

Height of channel support:
DN 50 (50 mm) = 120 mm

Schlüter®-KERDI-LINE-F with horizontal drain toward the front is equipped with an odour trap that is integrated into the drain. Height of channel support: DN 40 (40 mm) = 60 mm

Schlüter®-KERDI-LINE-V, -VS, -VOS for vertical drainage, e.g. through a floor structure, is available either with the odour trap integrated into the drain body (KERDI-LINE- V) or with a pipe siphon (KERDI-LINE-VS)– also available with offset drain outlet (KERDI-LINE-VOS).

Height of channel support: 
DN 50 (50 mm) = 24 mm

Schlüter®-KERDI-LINE-V 50 G2 with vertical drainage is equipped with an odour trap that is integrated into the drain body. In accordance with DIN 1253, it has a drain capacity of ≥ 0.8 l/s and a water trap height of 50 mm.

Height of channel support: 
DN 50 (50 mm) = 48 mm

For quick and easy installation, the channel body for KERDI-LINE-H50 and H40 is simply inserted into the precisely matching polystyrene channel support. Because of the drain configuration, the channel body and the channel support for Schlüter®-KERDI-LINE-F are permanently attached to one another. 
Schlüter®-KERDI-LINE can be universally used for centred installation in floor or wall areas.

Length of linear drainage KERDI-LINE-H , -H 50 G2 and -V, -VS, -V 50 G2: 
50 cm to 180 cm (VOS = off-centre drain outlet from 70 mm to 120 mm),

in increments of 10 cm Length of linear drainage KERDI-LINE-F:
50 cm to 120 cm, in increments of 10 cm

A collar made of Schlüter®-KERDI is adhere to the adhesive flange on all sides of the channel body. It ensures the reliable connection of the channel body to the bonded waterproofing assembly, both in the floor area and on upright walls. The visible surface of the frame and the grate, which is available in a closed or punched design or with square perforations, consists of brushed stainless steel. The design grate is also available as a 10 mm deep tile pan for tile inserts. A frameless covering support (Schlüter®-KERDI-LINE-D) that is universally suitable for all heights is also available.

Note: 
The matching sloped tray Schlüter®-KERDI-SHOWER-L with integrated KERDI waterproofing (see Product Data Sheet 8.8) can be installed with assemblies using Schlüter®-KERDI-LINE-H and -V up to a channel length of 120 cm. The installation of a sloped screed is also possible. The surface of the screed must be waterproofed with Schlüter®-KERDI (see Product Data Sheet 8.1) or Schlüter®-DITRA 25 (see Product Data Sheet 6.1).

The installation of a sloped screed is necessary for Schlüter®-KERDI-LINE-H50 G2, V50 G2, and KERDI-LINE-F due to the design of the drain position. In this case, the screed must be covered with Schlüter®-DITRA 25 (see product data sheet 6.1) at the surface for waterproofing. Alternative fixing methods are possible, please consult our Technical Department for advice.

The matching system profiles Schlüter®-SHOWERPROFILE-S and -R (see Product Data Sheet 14.1) are available for creating neat connections to the floor or wall. Schlüter®-SHOWERPROFILE-S has a tapered design to match the shape of the sloping sides. The surrounding walls must be covered with Schlüter®-KERDI (see Product Data Sheet 8.1) for waterproofing. As an alternative, Schlüter®-KERDI-BOARD (see Product Data Sheet 12.1) can be used to create a waterproofing assembly.

You may also like

Recently viewed