Description
LINEAR LEVELER PROLEVELING SYSTEM
The ProLeveling System is a revolutionary tile leveling system that uses only two components, a leveler and a cap, to lay tile quickly and easily. The system works to virtually eliminate any spacing and lippage problems on both floor and wall tile installations. And unlike most other systems, these levelers can also be used as traditional spacers without needing a tensioning tool.
A complete range of levelers is available in cross, linear (straight) and T shapes with spacer widths of 1mm, 2mm, 3mm and 5mm to allow for leveling of tiles from 3mm (1/8") to 40mm (1-5/8") thick. The levelers each have a threaded pin there the tensioning cap should be hand tightened, leveling the tile.
There are also optional protection cups available for added protection against tile marking (particularly on soft marble, onyx and other soft tiles) as well as removal caps for quickly removing used levelers from tensioning caps using a drill.
LAYING SYSTEM
- Choose the desired type of leveler
- Apply the thinset or mortar on a level base with the proper notched trowel as callet out in the setting materials manufacturer's installation instructions.
- During the application of the tile or other materials, position the base of the chosen leveler under the edge of the tile at the appropriate joint location and continue laying in sequence.
- Attach the cap to the threaded stem by rotating it clockwise. Level the joint by rotating the cap using the minimum amount of pressure needed.
- Once the setting materials have become solid and floor or wall is ready for grout : kick the cap in the direction of the joint to detach connection points between base and stem.