blaugelb Hybrid Polymer Power Fix 600ml white

20 bags

The blaugelb Hybrid Polymer Power Fix 600 ml white is a single-component permanently elastic sealant that is suitable for sealing expansion and connecting joints.

Formulated on the basis of a hybrid polymer, it exhibits particularly high initial adhesion and rapid full cure. The blaugelb Hybrid Polymer Power Fix 600 ml white is waterproof, weather and UV-resistant and also resistant to many chemicals. Thanks to its outstanding initial adhesion, it can usually be applied without primer to almost all – even wet – substrates encountered in construction. Because the blaugelb Hybrid Polymer Power Fix 600 ml white exhibits not only excellent sealing properties but is also particularly suitable for fastening components, the product is part of the pre-wall installation system blaugelb Triotherm+, where it is used as a sealant and adhesive for fitting the blaugelb Triotherm+ profiles, in conjunction with the triangular nozzle.

Applications: blaugelb Triotherm+ pre-wall installation system, sealing of connecting joints on windows and roller shutter cases, fastening and sealing in the metal and construction industry, for door frames, window sills, plates, panels, strips, wood constructions and insulating materials.

Substrates: Metals (steel, aluminium, brass, zinc etc.), plastics (poly-carbonate, PVC, ABS, polyamide, PMMA and GRP), cork, stone, enamel, glass, wood, HPL. Very well suited for concrete and cement-bonded fibreboard, sand-lime brick, hollow brick and porous concrete. The substrate should always be well cleaned for each application and not show any traces of release oil etc. Incompatibility (e.g. discolourations) may occur with natural stone. Do not use on PE, PP, PTFE or silicones.

Product benefits:

Outstanding initial adhesion on various substrates
Rapid full cure
High-performance sealing
Weather and UV-resistant, non-fading
System component of the tested pre-wall installation system
blaugelb Triotherm+
Exceptional final adhesion (320 kg/10 cm2)
Universally usable for sealing and fastening
Very good processability, moisture and temperature-resistant
Permanently elastic, compensates for unevenness and material movements
Silicone, isocyanate, solvent, halogen and acid-free
Non-corrosive
Virtually odourless
Exceptionally suited for time-critical application due to its fast
processability
Cured by atmospheric humidity from outside inwards
Very good coatability according to DIN 52452-A1*, can be painted over wet-in-wet
Suitable for all standard construction surfaces*
Building material class B2 (DIN 4102)
Tested to be low in pollutants according to EMICODE EC1 Plus

DOWNLOADS

Technical Data Sheet

Material base:	1C hybrid polymer
Colour:	white
Curing system:	polymerisation by atmospheric humidity
Building material class: DIN4102-4	B2
Curing speed: At 23°C and 50% RH	approx. 3mm/ 24hrs.
Skin formation: at 23°C and 50% RH	approx. 5 minutes
Density: DIN53479	1.47g/ml
Shore A hardness: DIN53505	60 +/- 5
Max. permissible deformation:	20 %
Change in volume: DINENISO105636	-3 to -4 vol.%
Tensile strength: DIN53504	3.5N/mm2
Tensile shear strength: DIN53504	1.4 N/mm²
Modulus of elasticity 100%: DINENISO8339	2.3 N/mm²
Elongation at break: DIN53504	400 %
Elastic recovery: ISO7389-B	>75%
Solvent content:	free
Isocyanate content:	free
Processing temperature:	Ambient: 0°C to +40°C substrate: 0°C to +35°C
Temperature resistance:	from -40°C to +90°C
Moisture resistance:	waterproof
Ecological report:	EMICODE EC1 Plus
Overpainting:	very good coatability according to DIN52452-A1, can be painted over wet-in-wet
Storage life:	12 months in unopened pack at +5°C to +25°C
Delivery form:	600ml tubular bag

Request Product Prices