Schlüter-DITRA-HEAT-PS is a polypropylene membrane with fleece covered in pressure sensitive adhesive laminated to the underside.
After peeling off the release film DITRA HEAT PS can be installed onto suitable substrates without the need of tile adhesive.
Ditra Heat peel and stick is intended for installation on interior floors.
Substrates for installing must be flat, clean, dust free, dry, smooth, rigid and load bearing, with no deflection.
To install peel the release film off DITRA-HEAT and place the membrane on the substrate.
It can be lifted and re-positioned providing no pressure has been applied to it. However once pressure has been applied the adhesive sticks the membrane firmly to the substrate. The heating cables can be installed immediately after adhering the membrane, using a minimum spacing of 9 cm (every third stud ≙ 136 W/m².